Özet:
In this study, a comparative assessment of the mechanical properties of chopped carbon fiber (CF) reinforced polypropylene (PP), polyethylene (PE), polyamide 6 (PA6), and polyamide 12 (PA12) composites was performed. A variation on the composites was obtained by changing the fiber volume fraction of the composite elements under the same manufacturing method and conditions. After blending reinforcement and matrix materials using the extrusion method, the composite materials were manufactured in the shape of plates with thermoforming. The composites’ tensile and 3-point bending tests were carried out, and the surface morphology of the fractured surfaces was examined by Scanning Electron Microscope (SEM). As the fiber content in all matrices increased, the efficiency of the fiber in the composites decreased. Finally, ANOVA analysis and mathematical model development by the least square optimization method were performed to analyze and fit experimental data. As a result of the ANOVA analysis, it was seen that the matrix type was more effective on the composite than the fiber type. The error of the modeling performed is less than 20% for the tensile and three-point bending tests.
